CNC DUAL 6-SIDED 2 AXIS DRILLING MACHINE

Product characteristics

Model: SD-VI-12S

1. After entering the processing data once, there is no need to turn the board; simply scan the code to conclude the processing.
2. The upper and lower spindles can machine symmetrical slots on the front and rear simultaneously.
3. The system and servo will maximize positioning speed and response time by utilizing the same CAM.
4. The guiding rail ensures precision and fully utilizes the servo’s capabilities.
5. Data connection, formats like .ban, .xml, .dxf, .mpr, etc.
6. HQD drill, side drilling wheel, vertical drilling plate, lower support plate: three methods for securing the panel.

SPECIFICATIONS

– Maximum working width : 1200 mm

– Minimum working width : 30 mm

– Shortest working length: 200 mm

– Fastest processing speed （m/min) : X/U130、Y/V70、Z/W30

– Number of directions of movement : 9

– Number of drill spindles: Above 2 + Under 1

– Control system & CAM : Higerman

– Drive system: Leadshine

– Number of top horizontal drill bits : Left right 2 + front and back 2

– Number of top vertical drill bits : 9

– Number of bottom vertical drill bits: 6

– Number of top spindles: 1 x 3.5KW

– Number of bottom spindles: 1 x 3.5KW

– Air pressure: 0.6-0.8Mpa

– Total capacity: 21KW

– Working voltage: AC380V/3PH/50Hz

– Diameter of suction port: φ150mm

– Machine dimensions (Length × Width × Height mm): 5000×2810×2000