Hammer K4 Perform Sliding Table Saw

  • Model: K4 Perform
  • Hammer K4 Perform Sliding Table Saw
  • Main engine: 7.5 HP (5.5 kW) 3×400 V, 50 Hz
  • Auxiliary saw motor (primary saw): 1.0 HP (0.75 kW)
0908.333.757 Get a quote  

Product characteristics

HAMMER K4 PERFORM SLIDING TABLE SAW REAL VALUE ON EVERY CUT

Wood & Brothers is the official distributor of the Hammer K4 Perform sliding table saw in Vietnam. The machine is packed and imported CBU from Austria to ensure stable quality after a long time of use. Wood & Brothers details the highlights of the Hammer K4 Perform sliding table saw in the article below.

The investment decision in Hammer ensures reliability for many years to come

HAMMER – Stability, functionality, and reliability from Austria – Hammer woodworking machines are the top-quality products of the Felder Group Since 1997, Hammer has been manufacturing high-quality yet affordable woodworking machines for workshops and smaller businesses.

The models have been specifically designed for this customer group and are now available in basic configurations, guaranteeing efficiency and providing cost-optimized solutions for every requirement. Austrian craftsmanship in woodworking machinery has many years of experience. Strict quality standards and Felder system solutions were tested, ensuring excellent woodworking machines and the best operating results. Customer satisfaction for many years to come is the motivation for Felder to research more new technologies to meet the high demand in wood furniture production.

Specifications of the Hammer K4 Perform Sliding Table Saw

Innovative circular sawing components with patented “Easy-Glide” tilt Combination of main saw blades with diameter from Ø 250 mm to Ø 315 mm and scoring unit Ø 120 mm is allowed. The “Easy-Glide” saw shaft tilting system is durable, unaffected by dirt, and requires no periodic maintenance.

The cast iron engine assembly, which powers the sliding table saw Hammer K4 Perform, sets new standards for performance and operational capabilities.

Machine parts are manufactured with strict standards

The saw blade tilts from 90° to 45°, which can be tilted to any position between 90° and 45° and ensures precise bevel cuts. End stops at 90° and 45° position are precise through the setting. The large scale is positioned towards the operator for precise setting and easy to prevent misreading.

Grooving, slotting and mortising each Hammer K3 Winner sliding table saw can be equipped with a spare for the use of a dedicated dado tool. The dado tool can be fitted to the saw shaft and creates grooves, mortises with different widths from 8 to 19.5 mm.

Sliding table made of solid cast iron , resistant to heavy loads manufactured following Hammer standards. The high-quality guide system ensures smooth and precise movement during operation.

Various optional functions

The stand is solidly built with a large usable surface area. There is a cross-section fence that supports the precise processing of wood and sheet, whether it is the large cut or cross cut without limit to the size of the workpiece.  

The Hammer K4 Perform sliding table saw with index piston can cut corners at 5° and 22.5° intervals using the index locator pin.

The fence supports cutting industrial boards, the fence can be adjusted flexibly depending on the size of the workpiece. Ensure smooth, accurate and time-saving operation.

Options: Adjust the table size according to the workpiece size. Machining long and heavy workpieces without support! The Hammer table extension system has been proven thousands of times worldwide. In just a few steps and without tools, the table extension can be attached to any Hammer machine. The surface can be extended by 400 or 800 mm on each side of the workbench. That means it is possible to increase the table’s length by up to 1600 mm!

Specifications of the Hammer K4 Perform Sliding Table Saw

  • Motor 5 kW
  • Large cutting length up to 3200 mm
  • Precise and durable sliding table over time
  • Specially, ”Easy-Glide” system makes tilting of the saw blade easy and ensures accurate cutting dimensions even with chamfer cuts.
  • Separate electric motor for blade
  • The ”Poly-V” belt system transfers maximum energy to the saw shaft

1. Engine

  • Main engine: 7.5 HP (5.5 kW) 3×400 V, 50 Hz
  • Auxiliary saw motor (primary saw): 1.0 HP (0.75 kW)

2. Sawing components

  • Main saw blade diameter from 250-315 mm
  • Saw blade speed 4800 rpm
  • Blade tilt 90-45 degrees
  • Maximum cutting height 103 mm
  • Blade unit, motor 1.0 HP

3.Sliding table

  • Sliding table’s length: 3200mm
  • Workpiece support table: 1290 mm
  • Cutting ruler for workpiece support table:: 2600 mm

4. General specifications

  • Working table height: 890mm
  • Vacuum connection: 120/80 mm

Woodworking machines from Felder Group – Austria are manufactured using European technology, with flexibility, friendliness and durability. Quality woodworking machines will ensure outstanding production needs. No more worries about minor machine breakdowns, no more concerns about uneven cuts or unsatisfactory production output. Woodworking machines at Wood & Brothers are a comprehensive solution for your furniture factory.

   Why should you choose Hammer products?

  • Great value worth the money
  • Reliable decision for many years to come
  • Highly improved machine technology
  • Tables and parts in solid cast iron
  • High quality, unique detailed solutions as standard
  • Top-quality manufacturing with strict quality guidelines
  • Exceptionally user-friendly
  • Classic design
  • Quality and precision from Austria
  • Multiple functions with compact design
  • Mobile function as an option
  • Limited space requirements
  • Least time-consuming

Video

Subscribe
Notify of
guest
Inline Feedbacks
View all comments
Website license by Nef Digital
0
Would love your thoughts, please comment.x
()
x