Jig saw N 4400

  • Manufactured and imported from Europe (EU)
  • Brand: Hammer
  • Model: N4400
  • Jig saw N 4400
0908.333.757 Get a quote  

Product characteristics


Customers who are looking for a flexible miter saw with all the important features, the N 4400 from Hammer is the top choice that meets all the criteria. Great performance and suitable budget, the N 4400 circular saw will certainly improve product quality and customer satisfaction.

Standard features include blade guides both above and below the table, blade tension indicator, tilting table and more – the N 4400 is an all-rounder at a great price!

Outstanding technical characteristics of the N 4400 circular saw | Hammer

Ceramic guides ensure excellent cutting results and maximum blade stability through four guide blocks and rear ceramic rollers directly adjacent to the blade. The flat surface ensures noise reduction and significantly reduces friction. With reduced friction and less heat generation, ceramic guides are practically wear-resistant and offer extremely long service life as well as consistent cutting quality when compared to roller guides. regular rolling. The X-Life ® ceramic circular saw blade guide has been developed specifically for Hammer and Felder circular saws and can be retrofitted as an accessory at any time.

The hammer band saw is equipped with upper and lower table guides with finely adjustable side and rear rollers.

The required cutting height can be set simply using the gear rack. With a cutting height of 310 mm, the Hammer is convincing in its segment and allows the production of solid wood veneers and more.

The cast iron table can be tilted from –5° to +45°, expanding the range of use to meet a variety of processing situations. The exact 90° position of the table is guaranteed by a finely adjustable stop. The tilt of the table can be set by adjusting the scale to one degree.

Machining long and heavy workpieces without assistance – no problem with the Hammer! The Hammer table extension system has been proven thousands of times worldwide. In just a few steps and without tools, the table extension can be attached to any Hammer machine. The N4400’s support surfaces can be extended to the right and behind the circular saw blade by 500 or 1000mm, depending on the table extension chosen.

Guided precisely along the circular bar, the fence can be positioned or rotated to the left or right of the saw blade. The aluminum fence is attached to the cast iron shell of the parallel fence and can be positioned along the cutting direction to improve the feedability of longer workpieces. To handle narrow workpieces, the aluminum fence can be laid flat from the usual vertical position.

The miter fence for the circular saw is available as an accessory and can slide into the groove on the cast iron table in the direction of cutting. The miter fence can be adjusted to any position between –45° and +45° for cross and miter cuts.

The large distance between the band saw’s flywheel castings enables the use of longer band saw blades. This is an advantage for customers, the large circular saw blade length is indispensable for the saw blade to move smoothly and smoothly, and the large number of teeth ensures a longer service life.

Circular saw blades can be changed quickly and easily in just a few steps. The band saw blade tension display makes it easy to set the appropriate tension using the hand crank. Another example of the absolute operator comfort provided by Hammer circular saws.

The rubber cover on the flywheel protects the circular saw blade and teeth. Over time, depending on the number of hours worked, the rubber cover will begin to wear out and must be replaced. Normally, the flywheel has to be removed and sent for restoration, but that is not the case with the Hammer circular saw: Customers can quickly and easily change the rubber cover themselves – it’s just a of the many benefits when deciding to choose Hammer!

Circular cutting device – for precise finishing of curves, segmented curves or circles.

Regardless of whether the customer decides to use the Hammer 1x 230 V or 3x 400 V band saw – the Hammer will be equipped with an ATB motor from Austria, specially developed for band saws. The high torque and extremely smooth operation of the motor are the keys to the high precision of the N 4400 miter saw.

Technical specifications of the N 4400 circular saw

  • Cast iron work table with adjustable tilt from -10o to +45o, 90o position fixed by stop bar
  • The base frame is firmly reinforced, low vibration, ensuring maximum stability
  • Felder “X-life” exclusive ceramic saw blade clamping system prevents abrasion due to friction and heat, and reduces noise to a maximum level (optional)
  • High torque motor manufactured in Austria for high speed of 850 rpm, smooth running motor for high accuracy and beautiful smooth product surface
  • The European-style top and bottom saw blade guiding system ensures precision and ease of adjustment
  • Protractor system allows cutting at many different angles (optional)
    Circular and semicircular precision cutting device (optional)
  • Laser alignment device helps minimize waste of excess workpieces (optional)


  • Motor  3.5HP (2.5kW) 3x400V, 50Hz
  • Saw set

– Saw blade diameter:  3976 mm
– Saw blade width:  6-25 mm
– Cutting speed:  20 m/s
– Flywheel speed:  850 rpm
– Maximum cutting height:  310 mm
– Maximum cutting width:  410 mm

  • General specifications

– Total height of the machine:  1865 mm
– Table height: 886 mm
– Saw table size: 420×575 mm
– Saw table tilt: -10° – +45°
– Diameter of vacuum cleaner head:  1×120 mm
– Weight: 170 kg


Notify of
Inline Feedbacks
View all comments

Get a quote

Website license by Nef Digital
Would love your thoughts, please comment.x